F3arRa1n Passcode & Bypass Icloud Untethered With Sim Card Working
F3arRa1n passcode and icloud bypass Untethered sim card working – F3arRa1n tutorial. Bypass for disabled or locked devices.
Remember, this tool is only for devices blocked or locked with PIN/passcode or disabled that show signal and the name of the operator at the top if you put in a SIM. You have a free version limited one device and a premium version if you need more features.
Everything is untethered.
Everything is untethered.
MAC TUTORIAL:
It was tested on MacOS Mojave 10.14.4 but it should be compatible with most versions.
Checkra1n Jailbreak
2.1- Check that you are not a robot.
2.2- Click on "Continue" below where it says "Continue with Linkvertise" - NOT "DIRECT LINK"
2.3- Wait 15 seconds for the button to be enabled. You will be taken to MEGA.
2- Extract the content of the .zip in a folder inside the Desktop. – This is to avoid having routes with spaces.
3- We have to install the dependencies,
OR THE TOOL WILL NOT WORK.
OR THE TOOL WILL NOT WORK.
You will see a file called “F3arRa1n-Dependencies-MAC.sh”
Open a terminal and run the following:
chmod 777 (leave a space, drag the file to terminal and hit Enter)
Then drag the file to the terminal and hit enter to run it. The dependencies will begin to install.
Example:
chmod 777 /Users/F3arRa1n/Desktop/MagnaF3ar/F3arRa1n-Dependencies-MAC.sh
/Users/F3arRa1n/Desktop/MagnaF3ar/F3arRa1n-Dependencies-MAC.sh
This will take a while. When it finishes you will see that it asks you to restart, DO NOT DO IT.
What you should do is RUN THE FILE AGAIN. Drag it back to the terminal and press Enter.
What you should do is RUN THE FILE AGAIN. Drag it back to the terminal and press Enter.
Example:
/Users/F3arRa1n/Desktop/MagnaF3ar/F3arRa1n-Dependencies-MAC.sh
When finished, DO NOT REBOOT YET. Open a new terminal and run the following commands:
ifuse
idevicerestore
If any error appears in either of the two that the command does not exist, send me all the text of your terminal by DM on Twitter to help you. DO NOT CONTINUE OR THE PROCESS WILL NOT WORK.
If ifuse says “No mount point specified” > THIS IS NOT AN ERROR, OKAY!
With idevicerestore you should see a list of more commands.
With idevicerestore you should see a list of more commands.
Close the terminal.
Reboot your Mac.
4- We are going to give execution permissions to the tool.
Run the following in a terminal:
Run the following in a terminal:
chmod -R 777 (leave a space, drag the tool folder to the terminal and press Enter)
Example:
chmod -R 777 /Users/F3arRa1n/Desktop/MagnaF3ar
5- Jailbreak your blocked device.
iOS 12.3 - 13.3.1 use checkra1n 0.9.5
6- Once the Jailbreak is ready, Double click on F3arRa1n-Start.command
7- Choose your language and the option you will use:
1 - Register.
This is done to then request information via DM about payment methods per device or reseller plans by sending only 'GGG' as a message to DM @ F3arRa1n.
2 - Login.
If you already have premium bypass devices or are a reseller.
3 - Token Access
Enter here with the token that a reseller has given you, linked to the serial number of your device.
4 - Free bypass.
To test the free bypass for PIN-locked or disabled devices. YOU CAN'T USE A PASSCODE HERE.
In the premium unlocks, FaceID, Passcode, Notifications, Siri, and iCloud sync work. Ask for info in DM by saying ‘GGG’
8- Choose an option that gives you access to the main menu. It can be 4.
9- Start the ‘P’ option and wait for the tool to indicate you have to restore to 13.4.x. Put your device in DFU mode and then type DONE in the tool to continue.
10- Once the restore is finished, Jailbreak with checkra1n 0.10.1.
11- When the device reboots, choose your Language, Country, Connect your WIFI. Press “Back” to return to the list of WIFI networks and leave the device there.
13- Keep the device connected to the PC and write DONE in the tool to continue.
14- The first time you run this version, other dependencies will be downloaded for the device. It will only be done once.
15- In one step, it will ask you to execute two commands in a new terminal, be sure to copy them well using the mouse, NOT WITH CTRL-C AND CTRL-V. Type DONE in the tool to continue when you finish.
Note: If you have a dpkg error here, delete the Datos/DebsScript folder of the tool and restart the tool. Choose ‘B’ option instead of ‘P’. You’ll be back to step 14.
16- The tool will continue. The device is going to restart and that indicates that everything is ready.
17- When the device turns on again, choose your Language, Country and choose to configure manually.
14- Done! Set your device like new.
WINDOWNS TUTORIAL:
This version is for 64-bit Windows.
Windows 10 is more compatible but Windows 7 should work OK.
Windows 10 is more compatible but Windows 7 should work OK.
1- Install Python 3.7.6 and 2.7.17
https://www.python.org/downloads/
2- Download the tool
https://www.python.org/downloads/
2- Download the tool
2.1- Check that you are not a robot.
2.2- Click on "Continue" below where it says "Continue with Linkvertise" - NOT "DIRECT LINK"
2.3- Wait 15 seconds for the button to be enabled. You will be taken to MEGA.
3- Extract the content of the .zip in a folder inside C: / – This is to avoid having paths with spaces.
4- Jailbreak your blocked device using a Mac or Ra1nUSB
You can see my Ra1nUSB tutorial to use Checkra1n on normal PC’s: https://rebrand.ly/6dpfp3p
You can see my Ra1nUSB tutorial to use Checkra1n on normal PC’s: https://rebrand.ly/6dpfp3p
iOS 12.3 - 13.3.1 use checkra1n 0.9.5
5- Once the Jailbreak is ready, connect to the PC with USB cable.
6- Double click on F3arRa1n-Start.cmd
7- Choose your language.
8- Choose option 4.
9- Start the ‘P’ option and wait for the tool to indicate you have to restore to 13.4.x with 3uTools or iTunes and do it.
10- Once the restoration is ready, Jailbreak with checkra1n 0.10.1.
11- Keep the device connected to the PC and write DONE in the tool to continue.
12- The tool will continue. The device is going to restart and that indicates that everything is ready.
13- When the device turns on again, choose your Language, Country, Connect your WIFI.
14- Done! Setup your device like new.
In the event that the activation lock appears again, you should contact me on Twitter saying ‘SSS’ and adding your serial number. Your activation data may have been expired since before starting the process.
IMPORTANT: If you have any error after it asks you to restore, or you want to recover your bypass, start the tool and run option ‘B’ instead of ‘P’.
In the event that the activation block appears again, you should contact @F3arRa1n on Twitter and add your serial number. Your activation data may have been expired since before starting the process. If everything went well, enjoy! And don’t forget to donate the developers.
All credits and support follow:
@F3arRa1n
@iCrack2014
